How To Disable ABS Brakes On Chevy Silverado [3 Easy Steps]

You need to know your car if you want to avoid all kinds of trouble you may have with it. Knowing how to disable ABS brakes on Chevy Silverado is definitely one of those things.

But doing such modification can be tricky. However, we will teach you the process in the easiest way possible. Here you will get to know how to bypass the Chevy ABS module in 3 simple steps. Keep scrolling to know everything about it.

How To Disable ABS Brakes On Chevy Silverado [3 Easy Steps]

If you have set your mind on how to disable the ABS system of your Chevy Silverado, then you have to follow the method we are about to discuss. For this process, you will only need a fuse puller and a socket wrench. No extra tools are required. Yes, it is that easy. 

If you are wondering which fuse puller will be perfect for you, you can settle for this Jonard Tools FP-600. I use this fuse puller for different purposes. You can get your one.

As for the socket wrench, you can buy the Universal Socket Tools. Now here’s what you need to do to disable your Chevy Silverado’s ABS brakes.

Note: You can also read how to disable the ABS light on Silverado.

Step 1: Getting Things Ready

The first thing you will need to do is prepare the car’s interior. For this, you will have to open the hood of your Chevy Silverado. To open the hood of your Chevy Silverado, you have to pull the lever located on the bottom left corner of the driver’s side of the car. 

You will hear a clicking sound. This means your Chevy Silverado’s hood has popped open. Now you can slide your hand under the hood of your car and lift it upwards to open it completely.

After this, you have to disconnect the negative battery cable. You will find it once you open the car hood. It has a black cap on with the ‘-’ (minus) sign. Take the universal socket wrench and set it on this cap. Turn it counterclockwise to disconnect the negative battery cable. And now, you are ready to proceed.

Step 2: Find The Main Relay Box

Now, you will have to locate the main relay box in your vehicle. In Chevy Silverado, the main relay box is usually located on the driver’s side of the instrument panel. You will find it presumably behind the cover.

If you can’t find it there, then take help from your car’s user manual. It is surely mentioned there.

Step 3: Disabling The ABS Brakes

Once you have found the main relay box, you will have to observe the diagram printed on the cover closely. This diagram will tell you where your ABS relay is located. Find the ABS relay and pull the ABS fuse off with the fuse puller. 

After you have made sure to pull off the ABS fuse, put the relay cover back on.And you have now perfectly disabled the ABS brakes on your Chevy Silverado.

Why Disabling ABS Brakes On Chevy Silverado Is A Good Idea

You may not want to generally disable the ABS brakes of your Chevy Silverado. However, there are some good reasons why you should do so. Here, take a look at the 3 reasons why disabling ABS brakes on Chevy Silverado is a good idea.

1. Inconsistent Stop Times:

ABS systems are designed to provide braking in slippery conditions. While this may work perfectly on wet roads, driving in dry or regular conditions can cause problems. ABS brakes can lengthen the stopping distance on dry roads. This poses a risk of accidents.

2. Affect The Car’s System:

The break sensor signals the ABS brake to activate. However, this sensor can get easily dirty or broken. When this happens, the car’s overall system can send a false signal to the ABS brake.

As a result, the vehicle will shudder every now and then. This, in turn, can cause great damage to different parts of the car.

3. Expensive To Maintain:

Installing and maintaining an ABS system can cost $1,000 to $1,500. Apart from this, having an ABS system installed can increase your car’s maintenance cost by a lot. So it may not be a worthy expenditure for you.

And this is all. Mainly due to the 3 issues discussed above, it is a good idea to disable the ABS brake on your Chevy Silverado.

How Do I Reset My ABS System?

You can reset your ABS system in the following way:

  • Turn the key to the “ON” position but do not start the engine
  • Give 3 quick presses on the gas padel 
  • Wait for the ABS light to come on
  • Start the engine once the ABS light comes on

And now you have reset your vehicle’s ABS system.


What Happens If I Remove The ABS Fuse?

Disabling ABS will not affect your vehicle’s mobility. But it can lock the wheels of your car. In addition, it will increase the stopping distance of your car and affect the braking while steering the car.

How Do I Know If My ABS Control Module Is Bad?

Here are some apparent signs that your ABS control module has gone bad: Glowing ABS warning light. Locked up brakes. The brake pedal is not responsive. The pedal effort has noticeably increased. Speedometer has failed.

What Can A Faulty ABS Sensor Cause?

You may experience pumping in the brake pedal while braking due to a faulty ABS sensor. It may also cause a delay to stop the car once the brakes are pushed. Most importantly, it can decrease stability under wet driving situations.

How Do I Fix My ABS System?

You can fix your ABS system easily in the following way: Check the ABS fuse. Make sure it is properly connected to the whole system. Replace the ABS wheel speed sensor. Check if the stator ring is completely fine. Try replacing the ABS computer module.

To Conclude:

You never know when you might need to disable the ABS brakes of your car. But when you do so, you may not have enough time to spear behind completing the process.

This is why we suggest you follow our discussion on how to disable ABS brakes on Chevy Silverado. 

As you can see, this method helps you to solve your problem in 3 easy steps. So, you shouldn’t have any problem at all. However, if you have any queries or suggestions, you can leave them in the comment box below.

About John M

John contributed as a technical head at an automobile company just 2 years after his post-graduation in Automobile Engineering. He loves to lead a free life, so he left his job & started blogging. Now, he does research on every automotive problem, part & product and seeks a better solution & best products & shares his findings with his readers to help them as well as to minimize their struggle.

Leave a Comment